Is Your Surface Ready for Adhesive Hooks and Mounting Tapes?

Cleaning and Preparing Surfaces

Isopropyl Alcohol (IPA) Mixture: For most surfaces, a 50:50 mixture of isopropyl alcohol and water is effective for cleaning. This solution removes oils and residues without leaving a film, ensuring optimal adhesive contact.

Avoid Residue: Ensure that cleaning agents do not leave behind any residue, as this can interfere with adhesive bonding.

Surface Types and Considerations

Textured or Porous Surfaces: Surfaces like concrete or wood may require sealing to create a uniform bonding surface. Sealing helps in providing a level surface for adhesion.

Low Surface Energy (LSE) Materials: Certain plastics may not bond well with adhesives. In such cases, using a primer can enhance adhesion by increasing surface energy.

Environmental Factors

Temperature: Apply adhesives within the manufacturer's recommended temperature range, typically between 21°C and 38°C. Applying below the recommended temperature can cause the adhesive to become too firm too quickly.

Humidity: High humidity can affect adhesive performance. Ensure that the environment is dry during application and curing.

Specific Surface Considerations

Freshly Painted Walls: Wait at least a week for paint to fully cure before applying adhesives. Fresh paint may not bond well, and cleaning agents can dull the surface.

Old Painted Walls: Old paint may peel or flake, weakening the adhesive bond. Multiple layers or treatments can create barriers to adhesion.

Wallpaper: Most wallpapers are too delicate for adhesive products and can tear upon application. It's advisable to avoid using adhesives on wallpapered surfaces.

Application Tips

• Firm Pressure: Applying firm pressure during installation ensures better adhesive contact and improves bond strength.
  
  

• Wait Time: Allow the adhesive to set for the recommended time before hanging items to ensure maximum bond strength.